Tool Steel Bar

Product Details:

We offer premium S1 Shock-Resistant Tool Steel Round Bars, specially engineered for tools exposed to high-impact loads and sudden shocks. With a unique chemical composition featuring high silicon content and moderate alloying, S1 steel delivers exceptional toughness and fatigue resistance while maintaining moderate hardness and wear resistance.

S1 is ideal for chisels, hammers, rivet sets, and other cold/hot work tools where shock loading is a major factor.

Mechanical Properties (After Heat Treatment):

• Hardness: 54 – 58 HRC

• Tensile Strength: ~1300–1450 MPa

• Impact Resistance: Excellent (Shock loads & repetitive impact)

• Fatigue Strength: Very High

• Toughness: Among the highest in cold work tool steels

• Wear Resistance: Moderate

Technical Specifications:

• Annealing Temperature: 800 – 850°C

• Hardening Temperature: 980 – 1030°C

• Tempering Range: 200 – 400°C (typically double/triple tempering)

• Quenching Medium: Oil or Air (depending on tool size)

• Machinability: Moderate; annealed condition recommended for machining

• Microstructure: Uniform, fine-grain martensite after heat treatment

Product Range:

• Diameter Range: 12 mm to 300 mm

• Length: 100 mm to 6000 mm (cut-to-length on request)

• Form: Round Bars (Black / Bright / Peeled / Ground)

• Tolerance: h11 / h13 / as per client requirement

• Surface Finish: Rust-protected / Oil-coated / Polished (on request)

Applications:

• Cold & hot chisels

• Pneumatic & air hammer tools

• Rivet sets & knock-out punches

• Demolition tools

• Cold heading & heading dies

• Drop forging tools

• Jackhammer bits, axes, breaker tools

• Heavy-duty hand tools

Key Features:

• Superior shock and impact resistance

• Maintains toughness in extreme service conditions

• Low risk of cracking or failure under repeated blows

• Good dimensional stability during heat treatment

• Air/oil hardenable versatility

• Moderate red-hardness (resists softening at working temperature)

Melting Process:

• EAF (Electric Arc Furnace) route

• VD (Vacuum Degassed) to reduce impurities

• Optional ESR (Electro Slag Remelting) for cleaner structure and toughness-critical tools

• Fine grain structure ensuring homogeneity and purity

Equivalent Grades: Available Makes:

• Imported: Bohler, Uddeholm, Daido, Kind & Co.

• Indian: MUSCO, Kalyani, FACOR, Sunflag, Mahindra

MTC & Compliance:

• Mill Test Certificate (MTC) provided with chemical & mechanical test reports

• Ultrasonic Testing (UT) available on request

• NACE MR0103 / MR0175 Compliance – Available for petrochemical-grade tools

• Third-party inspection from TUV / SGS / Lloyds / DNV

• Fully ISO 9001:2015 certified stock & supply

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock : Standard Size Immediate Delivery
• Packaging Details: Standard HDPE / Jute wrap Heat No. & Grade marked on both ends Wooden crates or steel pallets for export orders Rust protection oil-coated surface Cut-to-size bars available with protective plastic end caps

Product Details:

Our in-depth knowledge and industrial expertise enable us to offer a distinguished range of High Speed Steel. Our vendors manufacture this product by making use of high-grade raw material and high-end technology so as to maintain the set industry standards. To make a flawless dispatch from our end, our offered range is rigorously inspected by our quality inspectors against various parameters. This product is broadly acknowledged by our clients for its easy installation and sturdiness.

Features:

• Corrosion-resistance
• Easy to install
• Sturdy construction

High Speed Steel:

• DIN 1.3207, HS10-4-3-10, SKH57
• DIN 1.3243, HS6-5-2-5, ASTM / SAE / AISI M35, JIS SKH55
• DIN 1.3247, HS2-9-1-8, ASTM / SAE / AISI M42, JIS SKH59
• DIN 1.3343, HS6-5-2C, ASTM / SAE / AISI M2, JIS SKH51

Equivalent Grades
American	German		Japanese	China	Poland
	(W.Nr)	(DIN)
AISI M2	1.3343	HS6-5-2	SKH51	W6Mo5Cr4V2	SW7M
AISI M35	1.3243	HS6-5-2-5	SKH55	W6Mo5Cr4V2Co5	SK5M
AISI M42	1.3247	HS2-10-1-8	SKH59	W2Mo9Cr4VCo8	SK8M
AISI T1	1.3355	HS18-0-1	SKH2	W18Cr4V	SW18
AISI T4	1.3255	HS18-1-2-5	SKH3	W18Cr4VCo5	-
AISI T5	1.3265	HS18-1-2-10	SKH4	W18Cr4VCo8	-
AISI T42	1.3207	HS10-4-3-10	SKH57	-	SK10V

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock
• Packaging Details: As Per Standard Packaging

Product Details:

We are one of the fastest growing manufacturer, importer and stockiest of bright bars, rods, wires and other allied metals. The product range is acknowledged for its excellent features like durability, dimension accuracy and corrosion resistance.

Product Details:

M42 High-Speed Steel Round Bars

Key Features:

• Exceptional combination of hardness and red hardness
• Superior wear resistance and hot hardness
• Excellent machinability and grindability
• Suitable for high-speed cutting applications

Chemical Composition (Typical):

Physical Properties:

Applications:

• Twist drills
• Taps and dies
• Milling cutters
• Saw blades
• Reamers

Equivalent Grade:

• AISI M42
• ASTM A600
• DIN 1.3247
• JIS SKH59

Dimensions Available (Anita Steel & Metals):

• Diameter: 10mm to 200mm
• Length: 1000mm to 6000mm (custom lengths available on request)

Note: Chemical composition, physical properties, and dimensions may vary depending on specific manufacturing processes and requirements. Please consult Anita Steel & Metals for precise specifications.

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing

Product Details:

We are one of the fastest growing manufacturer, importer and stockiest of bright bars, rods, wires and other allied metals. The product range is acknowledged for its excellent features like durability, dimension accuracy and corrosion resistance.

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing

Product Details:

We are a trusted supplier of T4 Grade High-Speed Tool Steel Round Bars, known for their exceptional hot hardness, wear resistance, and edge retention. T4 HSS is a Tungsten-based air-hardening tool steel, widely used in high-performance cutting, shaping, and machining applications.

Product Specifications:

• Grade: T4 HSS (AISI T4 / DIN 1.3255 / SKH3)

• Form: Round Bars – Bright, Peeled, Ground & Black

• Diameter Range: 10 mm to 300 mm

• Length: Up to 6 meters (customized lengths available)

• Delivery Condition: Annealed / Hardened & Tempered

• Tolerances: h9/h11 or as per requirement

Technical Details:

• Tool Steel Type: Air-Hardening Tungsten-Based HSS

• Heat Treatment:

  • Hardening Temperature: 1230–1250°C

  • Tempering Temperature: 540–560°C (2–3 cycles)

• Machinability: Moderate in annealed condition

• Red Hardness: Excellent – retains hardness at high temperatures

Applications:

• Cutting Tools: Drills, Reamers, End Mills, Milling Cutters

• Broaches, Hobs, Taps & Dies

• Cold Forming Tools and Punches

• High-Speed Lathe Tools & Form Tools

• Gear Cutting & Metal Shaping Tools

Product Range:

• Round Bars: 10 mm to 300 mm

• Finish Options: Bright Drawn, Peeled, Ground, or Black

• Cut-to-Length Service Available

Key Features:

• Excellent Wear & Abrasion Resistance

• Superior Red Hardness and Edge Retention

• Air Hardening with Minimal Distortion

• High Heat Resistance for Tough Operating Conditions

• Long Tool Life in High-Speed Machining

Melting Process:

• Primary: Electric Arc Furnace (EAF)

• Refining: ESR (Electro Slag Remelting) or VAR (Vacuum Arc Remelting) – optional based on requirement

Equivalent Grades: Available Makes:

• BOHLER (Austria)

• MUSCO / KALYANI / BHUSHAN

• DEW (Germany)

• IMPORTED (EU / China)

Test Certificates & Compliance:

• Mill Test Certificate (MTC): EN 10204 3.1 / 3.2

• Ultrasonic Testing: As per ASTM A388

• NACE Compliance: MR0175 / MR0103 – on request

• Third-Party Inspection: TUV / BV / SGS available

Additional Information:

• Production Capacity: 10000 Kg
• Delivery Time: Ready Stock : Standard Size Immediate Delivery
• Packaging Details: HDPE Wrapped or Wooden Box Packing End Protection with Plastic/Steel Caps Each bar tagged with Heat No., Grade, and Size Export-worthy Bundling & Coating on Request

Product Details:

Anita Steel & Metals is a trusted stockist and supplier of Tool Steel S7 Round Bars sourced from renowned manufacturers like Musco, Powmex, and RL Steel. S7 is an air-hardening, shock-resistant tool steel known for its high impact toughness, excellent wear resistance, and moderate hot-working capability. It is widely used in applications requiring both strength and resilience under extreme stress conditions.

Key Features:

• High shock and impact resistance

• Good wear resistance and toughness

• Air-hardening steel with minimal distortion

• Excellent machinability in annealed condition

• Suitable for both cold and hot work tooling applications

Chemical Composition of Tool Steel S7 (Typical): Physical Properties: Applications:

• Cold work tooling (blanking, punching, trimming)

• Shear blades and chisels

• Air hammers and jackhammer tools

• Plastic molds requiring toughness

• Hot work tooling with moderate temperature exposure

• Die casting ejector pins and molds

Equivalent Grades: Available Dimensions (Round Bars):

• Diameter Range: 12 mm to 350 mm

• Length: 1000 mm to 6000 mm (Custom cut lengths available)

• Condition: Annealed / Hardened & Tempered

Supplied With: Manufacturer Test Certificate (MTC) – Musco / Powmex / RL Steel
Form: Round Bars (also available in flats and blocks upon request)

Additional Information:

• Production Capacity: 10000 Kg
• Delivery Time: Ready Stock
• Packaging Details: As Per Standard Packaging

Product Details:

We are one of the fastest growing manufacturer, importer and stockiest of bright bars, rods, wires and other allied metals. The product range is acknowledged for its excellent features like durability, dimension accuracy and corrosion resistance.

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing: HDPE & Metal Strapped Bundles Export Packing: Fumigated Wooden Boxes or Pallets Proper Heat No. & Grade marking on each bar Rust preventive coating available Ends protected with plastic caps on request

Product Details:

Key Features:

• Excellent combination of toughness and wear resistance
• Suitable for demanding cutting tool applications
• High strength and hardness at elevated temperatures
• Good machinability and dimensional stability

Chemical Composition (Typical):

Physical Properties:

Applications:

• Drills
• Taps
• Milling cutters
• Reamers
• Metalworking tools

Equivalent Grade:

• AISI M41
• ASTM A600
• DIN 1.3207
• JIS SKH58

Dimensions Available (Anita Steel & Metals):

• Diameter: 10mm to 200mm
• Length: 1000mm to 6000mm (custom lengths available on request)

Note: Chemical composition, physical properties, and dimensions may vary depending on specific manufacturing processes and requirements. Please consult Anita Steel & Metals for precise specifications.

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing

Product Details:

We offer premium-grade A2 Air-Hardening Cold Work Tool Steel Round Bars, known for their excellent wear resistance, dimensional stability, and superior toughness. A2 steel is ideal for applications involving forming, blanking, punching, and shearing at room temperature. It is an air-hardening tool steel, minimizing distortion during heat treatment and making it highly suitable for precision dies and tooling applications.

⚗️ Chemical Composition (%):

 

Mechanical Properties (After Heat Treatment):

• Hardness: 57 – 62 HRC

• Tensile Strength: ~1400 MPa

• Compressive Strength: High

• Impact Toughness: Medium (higher than D2)

• Dimensional Stability: Excellent during heat treatment

Technical Details:

• Annealing Temperature: 850°C – 900°C

• Hardening Temperature: 960°C – 980°C (Air/Oil Quench)

• Tempering Temperature: 150°C – 540°C (Usually in 2–3 cycles)

• Quenching Medium: Air / Oil

• Machinability: Good in annealed condition

• Density: ~7.7 g/cm³

Applications:

• Punches and Dies

• Blanking Tools

• Forming Tools

• Shear Blades

• Gauges & Fixtures

• Tool Holders

• Knurling and Embossing Tools

• Mould Inserts and Base Plates

Product Range:

• Form: Round Bars (Black, Peeled, Bright, Ground)

• Diameter: 10 mm to 300 mm

• Length: 100 mm to 6000 mm

• Tolerance: h11 / h13 / As per customer requirement

Key Features:

• Air-hardening steel – low distortion

• Good wear resistance and compressive strength

• Excellent dimensional stability

• Balanced toughness and machinability

• Suitable for high-precision tools

• Longer tool life under moderate impact loads

Melting Process:

• VD / ESR Route (Optional for critical applications)

• Fully killed, vacuum-degassed ingots

• Homogenized and annealed before dispatch

Equivalent Grades:

Make Available:

• Imported:

  • Bohler (Austria)

  • Uddeholm (Sweden)

  • Kind & Co. (Germany)

• Indian:

  • POWMEX, Graphite, MUSCO, Sunflag, Kalyani, Mahindra, FACOR

MTC & Compliance:

• Manufacturer Test Certificate (MTC) with each supply

• NACE MR0103 / MR0175 Compliant (On request)

• Third-party inspection from TUV / Lloyds / BV / DNV available

 

Additional Information:

• Production Capacity: 10000
• Delivery Time: Ready Stock, Standard Size immediate Delivery
• Packaging Details: Bars marked with Heat No. & Grade Packed in HDPE sheets or jute cloth Export-worthy wooden box/crate packaging Oil-coated finish for rust prevention Cut-to-size available with protective caps

Product Details:

We are one of the fastest growing manufacturer, importer and stockiest of bright bars, rods, wires and other allied metals. The product range is acknowledged for its excellent features like durability, dimension accuracy and corrosion resistance.

Product Details:

M2 High-Speed Steel Round Bars are premium-grade alloys renowned for their exceptional hardness, toughness, and wear resistance. Composed primarily of tungsten, molybdenum, vanadium, and carbon, with trace amounts of chromium, manganese, and silicon, these round bars offer superior mechanical properties. With a high carbon content, typically around 0.8% to 1.05%, M2 High-Speed Steel Round Bars boast excellent hardness and edge retention, making them ideal for cutting tools, drills, taps, and other machining applications.

These round bars exhibit outstanding machinability and heat resistance, ensuring reliable performance even under extreme temperatures and high-speed machining conditions. Known for their exceptional strength and durability, M2 High-Speed Steel Round Bars find extensive applications in aerospace, automotive, and manufacturing industries, where precision and efficiency are paramount.

Overall, M2 High-Speed Steel Round Bars combine exceptional chemical composition and physical properties to deliver reliable performance in demanding machining applications, making them a preferred choice for industries requiring high-performance cutting tools and components.

Additional Information:

• Production Capacity: 10000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing: HDPE & Metal Strapped Bundles Export Packing: Fumigated Wooden Boxes or Pallets Proper Heat No. & Grade marking on each bar Rust preventive coating available Ends protected with plastic caps on request

Product Details:

We are one of the fastest growing manufacturer, importer and stockiest of bright bars, rods, wires and other allied metals. The product range is acknowledged for its excellent features like durability, dimension accuracy and corrosion resistance.

Additional Information:

• Production Capacity: 10000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing: HDPE & Metal Strapped Bundles Export Packing: Fumigated Wooden Boxes or Pallets Proper Heat No. & Grade marking on each bar Rust preventive coating available Ends protected with plastic caps on request

Product Details:

M15 High-Speed Steel Round Bars

Key Features:

• Exceptional combination of hardness and wear resistance
• High red hardness for improved tool life
• Good toughness and machinability
• Suitable for high-speed machining applications

Chemical Composition (Typical):

Physical Properties:

Applications:

• Cutting tools such as drills, taps, and milling cutters
• High-speed machining applications
• Aerospace and automotive components
• Metalworking and tooling industry

Equivalent Grade:

• AISI M15
• ASTM A600
• DIN 1.3243
• JIS SKH51

Dimensions Available (Anita Steel & Metals):

• Diameter: 10mm to 200mm
• Length: 1000mm to 6000mm (custom lengths available on request)

Note: Chemical composition, physical properties, and dimensions may vary depending on specific manufacturing processes and requirements. Please consult Anita Steel & Metals for precise specifications.

Additional Information:

• Production Capacity: 1000 Kg
• Delivery Time: Ready Stock
• Packaging Details: Standard Packing: HDPE & Metal Strapped Bundles Export Packing: Fumigated Wooden Boxes or Pallets Proper Heat No. & Grade marking on each bar Rust preventive coating available Ends protected with plastic caps on request